序号 | 作者 | 文章题目 | 发表期刊 | 刊号 | 备注 |
1 | 许泽银 | Tribological properties of molybdenum disulphide nanoparticles in soybean oil | Tribology | 2014,3 | SCI |
2 | 王俊 | 基于ARM处理器的空气净化器控制系统设计 | 机电一体化 | 2014 | |
应用型人才培养与课程的模块化改革 | 合肥学院学报 | 2013, 23(3) | |
基于广义最小二乘法的随机非线性系统跟踪模块化设计 | 中国科学技术大学学报 | 2012,42(7) | |
Design and Implement of Wireless Measure and Control System for Greenhouse | Proceedings of the 30th CCC | 2011,July 22-24 EI: 20113914369164 | |
3 | 徐强 | 基于MATLAB偏曲轴少齿差行星减速器最大承载能力的研究 | 机械强度 | 2014,36(2) | |
新型双环减速器的啮合特性及装配条件分析 | 机械设计 | 2012,29(10) | |
Study on Life and Efficiency of Bearing of Planetary Gear Reducer of Less Tooth Difference with Biasing Crankshaft | Advanced Material Research | 2012,619(9) | EI |
Study on Calculations of Geometric Dimensions and Modification Coefficients of Planetary Gear Reducer of Less Tooth Difference with Biasing Crankshaft Based on Matlab | Advanced Material Research | 2012,644(11) | EI |
基于matlab的双环减速器几何尺寸及变位系数计算研究 | 机械传动 | 2013,37(3) | |
基于matlab变齿厚偏曲轴少齿差传动变位系数计算研究 | 机械设计 | 2013,30(6) | |
4 | 赵茂俞 | 高强度双相钢板的冲压回弹预测模型研究 | 热加工工艺 | 2014, 43(5) | |
微观组织对高强度双相钢板冲压回弹影响的研究 | 热加工工艺 | 2014, 43(3) | |
Parameters Optimization of Low Carbon Low Alloy Steel Annealing Process | Acta Metallurgica Sinica (English Letters) | 2013, 26(2) | SCI |
回火温度对双相钢热处理退火组织的影响 | 热加工工艺, | 2013, 42(4) | |
低碳低合金钢临界–亚临界退火材料综合塑性研究 | 热加工工艺 | 2012, 41(18) | |
高强度双相钢弯曲的微观组织形变与回弹机理研究 | 热加工工艺 | 2012, 41(15) | |
多圆弧覆盖件冲压回弹研究 | 热加工工艺 | 2011, 40(21) | |
Dynamically Regulate and Control Complicated Auto Panel Uniform Forming | Advanced Materials Research | 2011, 2 | EI |
复杂覆盖件均匀成形的动态调控研究 | 热加工工艺 | 2010, 39(21) | |
多目标质量的覆盖件成形工艺参数优化 | 机械工程学报 | 2009, 45(8) | EI |
基于灰色系统理论的铝合金覆盖件成形优化模拟 | 农业机械学报 | 2008, 39(10) | EI |
多元非线性回归的铝合金覆盖件成形模拟优化设计 | 农业机械学报 | 2008, 39(9) | EI |
杯形件成形优化的研究 | 热加工工艺 | 2008, 37(2) | |
基于厚度变化的杯形件拉深凹模圆角成形模拟 | 热加工工艺 | 2008, 37(5) | |
基于平行、放射线投影法的复杂覆盖件展开 | 锻压装备与技术 | 2007, 6 | |
5 | 谷曼 | Structural and mechanical properties of CuZr/AlN nanocomposites | Transactions of Nonferrous Metals Society of China | 2014,24(2) | SCI |
Structural and Mechanical Properties of Cu/AlN Nanocomposites with High Strength and High Conductivity | Rare Metal Materials and Engineering | 2014,43(7) | SCI |
Effect of aging treatment on structural and mechanical properties of CuCrZr/AlN nanocomposites | Applied Mechanicals and Materials | 2014,548-549(5) | SCI |
铁基粉末温压过程中的致密化 | 材料热处理学报 | 2014,35(6) | |
粉末压制过程中的摩擦行为研究 | 热加工工艺 | 2014,43(11) | |
不同压制工艺下的粉末颗粒变形三维细观模拟研究 | 热加工工艺 | 2015,44(5) | |
6 | 田春艳 | Effect of nano-TiN particles on microstructure and mechanical properties of Si3N4-based nanoceramics | Advances in Applied Ceramics | 2011,110(4) | |
Preparation and thermal fatigue behaviors of silicon nitride nano-ceramics | Advanced Materials Research | 2015,1095 | EI |
Preparation and thermal shock properties of Si3N4-WC nano-composites | The 2nd International Conference on Mechanic Automation and Control Engineering | 2011(2) | |
Thermal shock behavior of Si3N4-TiN nano-composites | International Journal of Refractory Metals & Hard Materials | 2011, 29(1):14-10 | SCI |
7 | 邢文静 | The Covitation Erosion Behavior of Copper Alloy in the Corrosive Medium | The 2nd International Conference on Mechanic Automation and Control Engineering | 2011 | EI |
Microstructure of Copper Alloy Effects or Cavitation Damage | Advanced Materials | 2011 | EI |
8 | 张远斌 | ITER校正场超导馈线系统地震分析 | 低温与超导 | 2013,41 | |
ITER结构冷却馈有限元分析 | 低温与超导 | 2012,40 | |
SST-1托卡马克绝缘子优化设计 | 原子能科学技术 | 2012,46(01) | EI |
ITER校正场磁体馈结构分析 | 原子能科学技术 | 2012,46(02) | EI |
9 | 袁永壮 | The Influence of Fatigue Life for Shoulder Fillet parameterin Stepped Shaft under Torsion Load | Applied Mechanics and Materials | 2013 | EI |
The Influencing Factors and Assessment Model of Fatigue Life of Shaft | Advanced Materials Research | 2013 | EI |
The Influence of notch geometric size in the fatigue strength of steel | Advanced Materials Research | 2014 | EI |
45钢V缺口轴向和扭转疲劳行为 | 材料热处理学报 | 2014 | EI |
缺口几何尺寸对钢材疲劳强度的影响 | 材料热处理学报 | 2015 | EI |
缺口敏感性对工件疲劳行为的影响 | 辽宁工程技术大学学报(自然科学版) | 2014 | |
10 | 夏小虎 | Effective Finite Horizon Linear-Quadratic Continuous Terminal Control, International Journal of Computational Methods | International Journal of Computational Methods | 2013,10(6) | EI |
11 | 韦韫 | 面向服务的网络化协同制造资源多目标重组优化调度 | 农业机械学报 | 2012 | |
面向服务的基于元模型的统一制造资源建模研究 | 中国机械工程 | 2012 | EI |
面向用户需求的制造资源模糊聚类研究 | 中国机械工程 | 2011 | |
12 | 徐启圣 | 基于油液降噪信息的发动机磨损多特征分析研究 | 中国机械工程 | 2010 | |
徐启圣 | Xu Houchang Zhang Yuanbin. Boundary Feature Study on Engine Wear Based on Wavelet Analysis | The proceedings of 2010 2nd International Conference on Signal Processing Systems (ICSPS) | 2010 | EI |
徐启圣 | Study on Attribute Reduction Based on Mapping Matrix | 2010 | EI |
13 | 张建中 | Research on Positioning Compensation in the Pick-and-Place System | Journal of Convergence Information Technology | Vol.8, No.10, pp.340-348,2013 | |
Experimental Research on the Sucker’s Positioning in the Lens’s Assembly System | Journal of Applied Sciences | Vol.13, No.14, 2837-2842, 2013 | EI |
14 | 刘罡 | 汽车电动助力转向系统的容错控制研究 | 合肥学院学报 | 2013第2期 | |
基于LPC2129定时器捕获功能的车速信号采集系统 | 单片机与嵌入式系统应用 | 2011第8期 | |
提高机械数控加工技术水平的有效策略 | 硅谷 | 2014第20期 | |
15 | 白琨 | 基于DSP的多台步进电机控制系统设计 | 合肥学院学报 | 2012第3期 | |
基于DSP的步进电机控制应用实例 | 新技术新工艺 | 2012第12期 | |
16 | 汪珺 | 分布式光纤在矿井温度监测中的应用 | 电子质量 | 2013.10 | |
基于单片机的数字摇杆控制器 | 现代经济信息 | 2014.11 | |
17 | 蒋克荣 | 基于改进阈值小波算法的汽车轮速信号处理。 | 仪器仪表学报 | 2010年第31卷第4期 736-740 | EI |
The research on vehicle anti-braking system control algorithm based on immune PID control. | 2012 International Meeting on Opto-Electronics Engineering and Materials Research. | (OEMR 2012).1024-1027 | EI |
Seamless integration of cam/cnc based on step-nc | 2013 2nd International Conference on Vehicle & Mechanical Engineering and Information Technology | (VMEIT 2013).956-959 | EI |
18 | 冯敏亮 | 基于ANSYS的超弹性模型参数确定 | 合肥学院学报 | 2012年第3期 | |
基于PDMS的带式输送机三维设计 | 合肥学院学报 | 2013年第4期 | |
19 | 姜海 | Effect of starting powders on microstructure and properties of silicon nitride nanoceramics | Applied Mechanics and Materials | 2012, (217-219) | EI |
20 | 张春鹏 | 基于声卡的多功能信号发生器设计 | 现代经济信息 | CN23-1056/F | |